Cargo Port & Logistics Yard Power

Salt spray, round-the-clock operation, and heavy equipment loads. We engineer lighting and power systems built to survive the marine industrial environment.

Why Standard Equipment Fails
The real cost of using
standard lighting in marine port environments
Salt-laden air, constant moisture, and round-the-clock heavy machinery operation create one of the most corrosive and demanding environments for industrial equipment.
🧂
Salt spray corrosion destroying fixtures
Airborne salt particles from ocean proximity accelerate corrosion on standard housings, compromising structural integrity within 12-18 months.
⚡ Impact: Structural failure risk, frequent replacement cycles
🌊
Water ingress from spray and washdown
Port operations involve frequent high-pressure washdown and constant sea spray exposure. Standard IP65 fixtures fail to maintain sealing integrity.
⚡ Impact: Electrical shorts, accelerated component failure
🏗️
High-mast maintenance access challenges
Port lighting is often mounted on 25-30m masts. Standard fixtures requiring frequent maintenance create significant access costs and safety risks.
⚡ Impact: High maintenance costs, extended access downtime
⚙️
Vibration from heavy crane and vehicle traffic
Constant operation of gantry cranes and heavy trucks creates continuous vibration that loosens standard fixture mountings.
⚡ Impact: Fixture misalignment, accelerated wear
🌙
Insufficient illumination for 24/7 operations
Container terminals require consistent high-output illumination for safe operations at night. Underpowered fixtures create visibility gaps.
⚡ Impact: Increased accident risk during night operations
💰
High total cost from frequent replacement
Corrosion, water damage, and vibration-related failures often result in replacement cycles of 1-2 years instead of the rated 5-10 years.
⚡ Impact: 3-4x higher lifetime cost than marine-rated alternatives
What We Provide
Integrated lighting & power
purpose-built for cargo ports
💡
Lighting Solution
Engineered for this environment
Marine-Grade Corrosion Protection
C5-M corrosion resistance rating with marine-grade aluminum housing and 316 stainless hardware, tested to 1000+ hours salt spray.
C5-M rated316 stainless hardware
IP68 Submersion-Rated Sealing
Exceeds standard IP66/67 ratings with full submersion resistance, maintaining seal integrity through washdown cycles.
IP68Washdown resistant
High-Mast Optical System
Precision optics designed for 25-30m mounting heights, delivering uniform illumination with minimal light spill.
30m mast optimizedLow spill design
Vibration-Damped Mounting
Reinforced mounting brackets with vibration isolation dampers, rated for continuous heavy equipment vibration.
Vibration isolatedSelf-locking hardware
🔋
Energy Storage Solution
Cabinet · Pack · BMS
Marine-Rated Storage Enclosure
C5-M corrosion-resistant cabinet construction for direct coastal exposure, with conformal-coated electronics.
C5-M enclosureConformal coating
Shore Power Integration
Seamless integration with port shore power systems for vessel berthing operations.
Shore power compatibleDual-mode operation
Peak Shaving for Crane Loads
Battery system absorbs peak power demand from crane operations, reducing grid connection costs.
Peak load shavingGrid cost reduction
Remote Fleet Monitoring
Centralized monitoring across multiple storage units via port-wide SCADA integration for predictive maintenance.
SCADA integrationPredictive maintenance
Why It Matters
Conssin vs. standard industrial equipment
SpecificationStandard IndustrialConssin Port Series
Corrosion resistanceC3 (standard industrial)C5-M (marine grade)
Ingress protectionIP65-66IP68 submersion-rated
Hardware materialGalvanized steel316 stainless steel
Expected service life1-2 years in port environments5-7 years with maintenance
Vibration toleranceUnspecifiedContinuous heavy-equipment rated
Maintenance access costHigh (frequent mast climbs)Reduced (extended service intervals)
OEM Capability
Customize for your
port or terminal requirements
No MOQ for prototypes. Full certification support included.
01
Port Authority Branding
Custom housing colors and port authority logo integration for fleet identification.
Custom colorsLogo integration
02
Shore Power Voltage Matching
Configure input voltage and frequency to match your regional shore power standards.
Multi-voltage supportRegional frequency matching
03
Extended Corrosion Warranty
Available extended warranty packages for coastal and offshore installations.
Extended warrantySalt-spray test data

RECOMMENDED PRODUCTS

Mining sites need reliable lighting and backup power together — not two separate suppliers, two separate maintenance schedules, and two points of failure.

Flood / Mining Light
INDUSTRIAL LIGHTING

Flood / Mining Light

Power range100W - 2000W
ProtectionIP69K · IK10
Temperature-40°C to +55°C
Service life50,000h
View product →
Industrial Storage Cabinet
ENERGY STORAGE

Industrial Storage Cabinet

Capacity80kWh
ProtectionIP67
BMSIn-house developed
Warranty5 years
View product →

Case Study

Refined Production Technology

Adopting standardized modular processes for assembly, battery integration and finished packaging, we ensure consistent product quality, stability and durability.

Refined Production Technology

Adopting standardized modular processes for assembly, battery integration and finished packaging, we ensure consistent product quality, stability and durability.

Refined Production Technology

Adopting standardized modular processes for assembly, battery integration and finished packaging, we ensure consistent product quality, stability and durability.

23 years of expertise. 200,000+ units delivered. 600+ clients across 30+ countries.

23 years of expertise. 200,000+ units delivered. 600+ clients across 30+ countries.

Talk to us about your next project.

Talk to us about your next project.

Start a Conversation

Start a Conversation

Start a Conversation

Start a Conversation